IC670MDL640是Fanuc通用电气制造的Filed控制系列的一部分。该模块设计用作扩展输入模块，安装在总线接口单元（BIU）模块所在的模块上。
以下是关于IC670MDL640的详细解释：
输入通道与配置：具有16个输入通道，支持正逻辑接线配置和负逻辑接线配置。这种支持使得该模块适用于不同区域，因为正逻辑和负逻辑接线的使用有时取决于特定区域或安装区域内的适用标准。
输入通道设计用于接受0-30 VDC的输入信号电压范围，标称电压为24 VDC，用户输入电流为每点7.5 mA。
电流与电压参数：IC670MDL640 模块的电流消耗为75 mA，来自总线接口单元（BIU）电源，所有输入均处于活动状态时，最大电流消耗为83 mA。
通态电压额定值为**+15 VDC至+30 VDC（正逻辑）和-15 VDC至-30 VDC（负逻辑），而断态电压为0至+5VDC（正逻辑）和0至-5VDC**对于负逻辑配置。
响应时间与阻抗：典型响应时间为6 ms，最大响应时间为10 ms。典型输入阻抗为3K 欧姆。
兼容性与应用：IC670MDL640 该模块与各种可编程逻辑控制器兼容，适用于目录号为IC670和IC670MDL的型号。它是按照CE和UL标准等标准中规定的要求制造的，适用于标准工业环境，但不适合在危险场所使用。作为工业应用过程的重要设备，它可以用作独立控制器网络的一部分。
The IC670MDL640 is part of the Filed Control family manufactured by Fanuc GE. This module is designed to be used as an expansion input module and is mounted on the module where the Bus Interface Unit (BIU) module is located.
The following is a detailed explanation of the IC670MDL640:
Input channels and configuration: with 16 input channels, support positive and negative logic wiring configuration. This support makes the module suitable for different regions, as the use of positive and negative logic wiring sometimes depends on the applicable standards within a particular region or installation area.
The input channel is designed to accept an input signal voltage range of 0-30 VDC, with a nominal voltage of 24 VDC and a user input current of 7.5 mA per point.
Current and voltage parameters: The IC670MDL640 module has a current consumption of 75 mA from the Bus Interface Unit (BIU) power supply, with a maximum current consumption of 83 mA when all inputs are active.
On-state voltages are rated **+15 VDC to +30 VDC (positive logic) and -15 VDC to -30 VDC (negative logic), while off-state voltages are 0 to +5VDC (positive logic) and 0 to -5VDC** for negative logic configurations.
Response time and impedance: Typical response time is 6 ms, maximum response time is 10 ms. Typical input impedance is 3K ohms.
Compatibility and Application: IC670MDL640 This module is compatible with a variety of programmable logic controllers and is suitable for models with catalog numbers IC670 and IC670MDL. It is manufactured in accordance with the requirements specified in standards such as CE and UL standards and is suitable for use in standard industrial environments, but is not suitable for use in hazardous sites. As an important device for industrial application processes, it can be used as part of an independent controller network.
| IC698CPE040-JP | IS215UCVEM06A | IS220UCSAH1AK |
| IS215UCVEMO9B | DS200FCGDH1B | IS200EPSMG2AEC |
| VMIVME-7807 | VMIVME-7750-734 | IS200EPSMG2A |
| IS200ERSCG1A | IS220PD1H1BD | IS200EPSMG2ADC |
| IS200VCMIH2BEE | IC698CPE040-FJ | VMVME-5565-110000 |
| IS200BPVCG1BR1 | VMIVME7740-841 | DS200FGPAG1A |
| IS420UCSBH4A | IS220UCSAH1A | H201TI |
| IC800SS1228RD2 | IS420UCSBH1A | IS220PSVOH1A |
| IS420YDOAS1B | TP202QSS RMS-9 | IS200TRPGH1B |
| VMIVME-4150 | VME7740-841 | IS200VSVOH1BED |
| IC698CPE030 | VME-7807RC | DS2001TXDG1ABA |
| IC698CPE010 | VMIVME 2540-300 | VMIVME-7807RC |
| HYDRAN M2 | VMIVME-7740-840 350-07740-840-M | VMVME-7807 |
主要产品：
ABB---AC 800M控制器、贝利、PM866控制器、IGCT可 控硅5SHY 3BHB01 3BHE00 3HNA00 DSQC系列
本特利(BENTLY) ---3500系统/前置器、前后卡、传感器、电源模块、探头、电缆
艾默生(EMERSON) --modbus卡、 电源板、控制器、电源、底座、电源模块、交换机
EPRO --- 数据采集模块、探头、转速传感器、振动传感器、轴振变送器、前置器福克斯波罗(FOXBORO) ---热电阻输入输出模块、电源模块、通讯模块、电缆、控制器、交换机
GE ---模块、空气开关、I/0模块、 显示器、CPU模块、 电源模块、转换器、CPU板、 以太网模块、综合保护装置、电源模块、燃机卡
黑马(HIMA) ---DI模块、处理器模块、AI卡件、脉冲编码器
霍尼韦尔(HONEYWELL) ---安全型数字输出卡、程序模块、模拟输入卡、CPU模块、FIM卡
穆格(MOOG) ---伺服阀、控制器、模块、电源模块
NI ---信息采集卡、PXI模块、卡件、机箱多通道控制卡
西屋(WESTINGHOUSE) ---RTD热电阻输入模块、AI/AO/DI/DO模块、电源模块、控制模块、底座模块.
伍德沃德(WOODWARD) ---调节器、模块、控制器、调速器
横河(Y0KOGAWA) ---伺服模块、控制柜节点单元.
主营产品:
plc、DCS、CPU模块、通讯模块、输入输出模块(AI/A0/I/DO)、电源模块、可控硅模块、端子模块、PXI模块、伺服驱动、伺服电机、
工业显示屏、工业键盘、控制器、编码器、调节器、传感器、I/0板、计数板、光纤接口板、采集卡、燃机卡、FDM卡等自动化备件
