216DB61 HESG324063R100/J是一款模拟量模块，以下是关于其相关参数的介绍：
功能：该模块能够采集标准电流和电压信号，包括0-20mA、4-20mA两种电流信号，以及0-10 VDC的电压信号。
通道值范围与精度：模拟量通道的值范围是0~1000，精度为10位。
电缆长度：支持的大电缆长度，对于屏蔽线可以达到10米。
信号类型与接线方式：模拟量电流、电压信号根据模拟量仪表或设备线缆个数分成四线制、三线制、两线制三种类型。
四线制指的是模拟量仪表或设备上信号线和电源线加起来有4根线，而三线制则是信号线和电源线加起来有3根线。
供电：该装置以24 V直流电供电，并提供冗余电源。
继电器与保护功能：该模块包含6个跳闸继电器和14个信号继电器。继电器由跳闸单元和二进制O/P单元控制。此外，
该装置还有保险丝来保护24 V电源不受装置短路的影响。
二进制输入与输出：二进制信号可以具有逻辑“0”或逻辑“1”的值。二进制输入值可以是双重指示信号，即两个连续的二进制输入是组合的。
216DB61 HESG324063R100/J is an analog module, the following is an introduction to its related parameters:
Function: The module is capable of collecting standard current and voltage signals, including 0-20mA and 4-20mA current signals,
as well as 0-10 VDC voltage signals.
Channel value range and accuracy: The value range of the analog channel is 0~1000, and the accuracy is 10 bits.
Cable length: Supports large cable lengths, up to 10 meters for shielded lines.
Signal type and wiring mode: Analog current and voltage signals are divided into four wire system, three wire system and two wire
system according to the number of analog instruments or equipment cables. The four-wire system means that the signal line and the
power line on the analog instrument or equipment have 4 wires, and the three-wire system means that the signal line and the power line have 3 wires.
Power supply: The unit is powered by 24 V DC and provides redundant power.
Relays and protection: The module contains 6 trip relays and 14 signal relays. The relay is controlled by a tripping unit and a binary O/P unit.
In addition, the unit has a fuse to protect the 24 V power supply from a short circuit in the unit.
Binary input and output: Binary signals can have a logical "0" or a logical "1" value. The binary input value can be a dual indication signal, that
is, two consecutive binary inputs are combined.
