SC510 3BSE003832R1 是一款三相混合式步进驱动器，采用伺服原理工作，
用于驱动SM3系列2Nm~50Nm的三相混合式步进电机。
输入电压：220VDC。
最大驱动相电流：8.0A。
控制方式：支持脉冲+方向以及双脉冲信号对步进电机进行控制。
功能特点：最大细分60000步。支持双脉冲控制。内置再生放电电路。220VAC供电。
功率范围宽泛：标准50W到1000W（最高5kw可按需提供）。
低齿槽效应。
峰值转矩 = 3 倍额定转矩。
额定速度：3000 RPM。
反馈选择：单圈20 bits绝对式编码器；多圈，20 bits单圈 + 16 bits多圈
SC510 3BSE003832R1 is a three-phase hybrid stepper driver, using the servo principle, used to
drive SM3 series of 2Nm~50Nm three-phase hybrid stepper motor.
Input voltage: 220VDC.
Maximum driving phase current: 8.0A.
Control mode: Support pulse + direction and double pulse signal to control the stepper motor.
Features: Maximum subdivision 60000 steps. Supports dual pulse control. Built-in regenerative discharge circuit. 220VAC power supply.
Wide power range: standard 50W to 1000W (up to 5kw available on demand).
Low alveolar effect.
Peak torque = 3 times rated torque.
Rated speed: 3000 RPM.
Feedback selection: 20 bits per cycle absolute encoder; Multi-turn, 20 bits single turn + 16 bits multi-turn
| ABB | MVR 0.44-10KA |
| ABB | NPCT-01C |
| ABB | PCD244A101 |
| ABB | PDD200A101 |
| ABB | PDD205A0121 |
| ABB | PFCL201C 10KN |
| ABB | PFCL201C 20KN |
| ABB | PFTL101A 1.0KN |
| ABB | PFXA401SF |
| ABB | PM864AK01-eA |
| ABB | PM866A-2 |
| ABB | REF610 |
| ABB | RET650 |
| ABB | RK682011-BA |
| ABB | SA801F |
| ABB | SAFT183VMC |
| ABB | SC510 |
