SPBRC410 控制器模块 单双脉冲选择功能

SPBRC410是一种控制器模块。

以下是关于SPBRC410模块的一些详细参数和特性：

技术规格：

电压范围：DC24V-50V。

细分：共16档。

最高脉冲响应频率：可达500KHZ。

力矩衰减小，转速可达3000rpm。

内置到位和报警输出，方便监测和控制。

智能调节电流，减少振动、噪声和发热，效率提升35%。

具有单双脉冲选择功能，出厂默认值为脉冲+方向控制。

功能特点：

SPBRC410还具有内置编程功能，可轻松实现逻辑控制、点位控制、电子齿轮、电子凸轮、高速位置捕捉等运动控制功能。

提供众多的功能模块可选。

支持多种编码器接口，如增量型、SinCos、Hiperface、EnDat、SSI等。

支持多种现场总线

通信与接口：SPBRC410带有Modbus TCP接口，允许通过标准以太网（TCP/IP）传输数据，不同于使用Modbus RTU和ASCII的串行传输。

应用与环境：适用于多种工业环境

工作温度范围为0℃至50℃，存储温度范围为-40℃至65℃。

电磁兼容性符合EN55022 class B标准。

SPBRC410 is a controller module.

The following are some detailed parameters and features of the SPBRC410 module:

Technical specifications:

Voltage range: DC24V-50V.

Subdivision: 16 files in total.

Maximum pulse response frequency: up to 500KHZ.

The torque attenuation is small, and the speed can reach 3000rpm.

Built-in in place and alarm output for easy monitoring and control.

Intelligent current regulation, reduce vibration, noise and heat, improve efficiency by 35%.

With single and double pulse selection function, the factory default is pulse + direction control.

Functional features:

The SPBRC410 also has a built-in programming function for easy implementation of logic control, point control, electronic gear, 

electronic CAM, high-speed position capture and other motion control functions.

A wide range of functional modules are available.

Supports a variety of encoder interfaces, such as incremental, SinCos, Hiperface, EnDat, SSI, etc.

Supports a variety of fieldbuses

Communication and interface: The SPBRC410 comes with a Modbus TCP interface that allows data transmission over standard 

Ethernet (TCP/IP), unlike serial transmission using Modbus RTU and ASCII.

Application and environment: Suitable for a variety of industrial environments

The operating temperature ranges from 0 ° C to 50 ° C, and the storage temperature ranges from -40 ° C to 65 ° C.

The electromagnetic compatibility meets the EN55022 class B standard.